Trailers

Doleco’s cargo restraint solutions

Doleco’s latest Cargo Restraint Systems and Lifting Solutions catalog includes several of the company’s latest products, including a black winch strap with reflective fiber for visibility at night. The company also has introduced a fifth-wheel pin puller, new winch straps in the country colors of the United States, Mexico and Canada, and its user-friendly and robust Red Series hoist line that includes a safety latch, a 360-degree rotating hook and a release for fast pulling ...

Read More

HandETrack’s cargo bolt-down fitting

HandETrack’s cargo bolt-down fitting is built to connect to track systems found in enclosed trailers, truck beds, cargo vans and semi-trailers to provide a rigid connection point. The fittings provide two hardened-steel ¼-inch-20 or 5/16-inch-18 threaded bolt-down points that can be relocated across the various anchoring slots of the rails with a flush-mount fit, allowing users to secure necessities such as spare tires and tools. HandETrack, handetrack.com

Read More

Ancra’s load securement tool

Ancra’s Toss ’N Tie is designed to provide a safe, quick and easy way to assist drivers during load securement without injuring themselves and damaging the trailer and load. Attach the tool to one of the company’s cargo straps or chains, toss it over the load in one motion, go to the other side, grab the cord, and pull the tiedown into place. Ancra International, www.ancracargo.com

Read More

Talbert’s bus hauler

Talbert Manufacturing’s 50CC-BH 50-Ton Bus Hauler is designed to provide enhanced versatility with an in-deck winch for users to load equipment from either the trailer’s front or rear. The 50CC-BH is engineered with a 50-ton capacity rating for hauling a wide range of oversized equipment, including buses, excavators and Class A trucks. The trailer also is suited for hauling equipment with low clearance and long wheelbases such as graders and aircraft refueler trucks. The deck’s main ...

Read More

J&J Truck Bodies & Trailers’ pressure vacuum tank

J&J Truck Bodies & Trailers’ stainless-steel Pressure Vacuum Tank has capacities ranging from 3,360 to 6,000 gallons and is suited for energy companies to transport fresh water, treated water and/or production water for the oil and gas industry. The corrosion-resistant configuration is outfitted with one-piece aluminum hose trays, anti-surge interior baffles, top and rear manways and plug-and-play vacuum pumps. Options include the company’s Armor Coat along the full length of the tank, toolboxes and onboard scales. J&J ...

Read More

East’s lightweight tipper trailer

East’s Lightweight Tipper Trailer is designed to maximize payload for daily refuse hauls in harsh conditions. The trailer removes 1,200 pounds from the fifth-wheel plate area, suspension subframe and body sides, and an aluminum bumper assembly replaces the standard steel assembly. Double-wall 2-inch-thick extruded aluminum panels are used on the easy-to-clean aerodynamic East Genesis smooth-sided design with a floor-to-wall attachment that secures the welded union of crossmembers, floor plates and sidewalls; the crossmembers and floor ...

Read More

Kinedyne’s wall-mounted storage system

Kinedyne’s E-Hook is a wall-mounted freight-loading storage device designed to allow haulers to safely and securely stow long and unwieldy cargo such as tubes, pipes, beams, cables and hoses and keep it off the floor. The E-Hook can be mounted to any vertically-installed track or logistics post system by inserting the brackets into the track slots and sliding them down until they are seated securely. It has a working load limit of 300 pounds, and ...

Read More