3×3 aerodynamic trailer tail

Aero, add-ons, chrome | October 15, 2013

ATDynamics-TrailerTail-Trident-3x3ATDynamics’ TrailerTail Trident 3×3 is a three-sided 3-foot-long aerodynamic device designed to reduce semi-trailer suction drag and provide about 90 percent of the fuel savings benefit of the company’s longer 4×4 version, which has an additional lower panel section.

The EasyLatch system is designed to allow drivers to deploy and collapse the device with no interaction, and notification decals placed above the trailer’s landing gear and front driver-side corner help ensure that drivers are aware when trailers are equipped with aerodynamic devices. The company’s EasyInstall hardware system is designed to allow for 30-minute installation on a dry van trailer.

To view a demonstration on how a TrailerTail opens and closes, click here. For more information, visit www.atdynamics.com.

- See more at: http://www.ccjdigital.com/atdynamics-offers-shorter-trident-3×3-aerodynamic-trailer-tail/#sthash.8yhiPiEH.dpuf

Hogebuilt’s fender bracket

Hogebuilt’s FM2012 triangle arm fender bracket is designed to bolt directly to the frame using a single bolt, eliminating the need for a post mount and clamp. The durable, stylish bracket is made of 11-gauge 304 stainless steel and is available in a 27-, 30- ...

Hendrickson’s ProStar bumpers

Hendrickson Bumper and Trim’s durable corrosion-resistant Aero Clad bumpers for the International ProStar in both tilt-mount and fixed-mount configurations are designed to retrofit all model-year trucks. The bumpers are built to offer nearly 4 inches of additional ground clearance and to be lighter than the ...

Fleetline’s refuse fenders

Fleetline’s polyethylene refuse fenders are constructed of high-density polyethylene and are designed to be corrosion- and UV-resistant. The fenders use either a two- or three-piece design to accommodate both tandem and tri-axle applications. Fleetline, www.fleetlineproducts.com

Hogebuilt’s quarter fender

Hogebuilt’s Q134 34-inch premium stainless-steel quarter fender has a mirror finish and is equipped with a heavy-duty 12-gauge universal post-mount triangle arm. The Q134 has a three-inch side flange and is available in 24- to 34-inch sizes. Hogebuilt, www.hogebuilt.com

Aero Clad bumpers

Hendrickson Bumper and Trim’s durable corrosion-resistant Aero Clad bumper for the International ProStar with universal tilt-mount is designed to retrofit all model-year trucks and to convert any fixed-mount bumper into a tilt-mount configuration. The bumper is built to offer nearly 4 inches of additional ground ...

Editor's Picks

Stay Connected

Sign up to get Overdrive's daily newsletter.

Poll

View Results