Four-Lamp LED Fixture

Lights | January 22, 2014

Larson-Electronics-explosion-proof-4-foot-4-lamp-LED-light-fixtureLarson Electronics’ explosion-proof 4-foot 4-lamp LED light fixture is approved for paint spray booths and designed to provide improved output and durability for areas where flammable petrochemical vapors and pulverized dust exist.

The lightweight fixture has a slim profile and uses the company’s LED T series 24-watt lamps that produce 15 percent more foot candles than the previous T8 configuration and are rated at 50,000 hours of service life. The fixture is multivoltage-capable and works on 120, 220, 240 and 277 volts AC.

The lamp’s solid-state design and integral spring-loaded end sockets help provided added resistance to damage from vibrations and extreme temperatures. The L-bracket mounts can be adjusted to create angle mounts, and a single through bolt can be used to secure the light.

Larson also offers Magnalight’s LEDT8-28W-V1 28-watt T-series LED tube lamp suited for upgrading existing T8 fluorescent lamp fixtures to LEDs as well as being a direct replacement for the company’s own LED light fixtures. For more information, visit www.magnalight.com.

- See more at: http://www.ccjdigital.com/larson-spotlights-led-light-fixture/#sthash.zq9E7LPo.dpuf

Peterson’s LED light bar

Peterson’s 359 Series light for cargo vehicle interiors features a slim 1-by-18-inch bar of Great White LEDs outputting 600 lumens per unit and offers no-splice harness connections and surface screw-mount versatility whether mounted horizontally and/or vertically.
Designed for use in any environment from -55 degrees Fahrenheit ...

Grote’s integrated LED

Grote’s LED 6-inch oval and 4-inch round Stop/Tail/Turn lamps both are equipped with an integral LED built-in backup lamp designed to combine dual functions with longer-life LED technology. Combining S/S/T and backup functions allows elimination of two holes and two lamps at the rear of ...

Optronics’ combo lamp

Optronics’ STL68 Combo Lamp is a 9-inch oval combination LED stop, tail, turn and backup lamp that employs a solid-state surface-mount device design to help protect the enclosed electronics against moisture, shock and vibration. The low-profile lamp is ½-inch thick and mounts with a ½-inch ...

Pedestal-mount LED light

Larson Electronics’ pedestal-mount 150-watt LED lamp assembly has an aluminum base stand with magnetic mounting capabilities and is designed to illuminate 8,000 square feet of work area with 10,000 lumens of light output, providing a hazardous location-suitable lighting solution. The lamp features a 16-inch light head ...

Replacement LED tube lamp

Larson Electronics’ Magnalight LEDT8-28W-V1 28-watt T-series LED tube lamp is suited for upgrading existing T8 fluorescent lamp fixtures to LEDs as well as being a direct replacement for the company’s own LED light fixtures. The polycarbonate lens is designed to diffuse light, makes the bulb suitable ...

Stay Connected

Sign up to get Overdrive's daily newsletter.

Poll

View Results