Goosenecks increase payloads

Trailers | August 29, 2012

Choose from 60,000-, 75,000- and 90,000-pound capacity models of Trail King’s Mechanical Detachable Gooseneck trailer and bank weight savings to increase payloads by 750 to 1,000 pounds over previous models. The MG offers aluminum cross-members and outer rails as standard equipment on the upper deck and wheel area with four steel main I-beams constructed of one-piece web and flange material welded tight on all sides. Additional features: a reinforced gooseneck, removable gooseneck rollers, adjustable ride height control and an air-activated self-locking pin for the gooseneck.

Trail King, trailking.com

Sliding axle flatbed trailer

Fontaine Trailer’s Infinity Superior Slide flatbed trailer features independent sliding axles and can be configured as a closed tandem set at the rear, a closed tandem set at the front, a full 10-foot spread axle and any combination in between. The trailer is constructed with steel ...

Cradle system coil hauler

Transcraft’s Coil Hauler uses a bolt-together rubber-lined cradle system with a total payload capacity of 90,000 pounds, making the trailer capable of transporting metal coils up to 80 inches wide while helping to protect freight from edge damage. A natural low center of gravity is engineered ...

Aluminum flatbed with sliding enclosure

East’s narrow-neck all-aluminum flatbed trailer has been combined with Sliding Systems Inc.’s all-aluminum Curtainside unit to facilitate lighter weight to haul freight heavy enough for a flatbed with the load capacity and enclosure of a van. The 8-inch neck is engineered to offer the same ...

High efficiency cooling systems

Carrier Transicold’s ultra-high-efficiency X4 Series includes the 7500 and 7300 single-temperature belt-driven models, which provide 68,000 and 66,000 BTUs of cooling, respectively, at a setpoint of 35 degrees Fahrenheit (100 F ambient) while requiring less power than the company’s prior platform. Carrier’s proprietary ecoForward technologies equip ...

Compact platform and step system

Bustin’s Slide & Go Space Saver Platform is a compact platform and step system that can be mounted on existing equipment on most truck bodies, including flatbed trailers, vocational trucks and recreational vehicles. The platform is designed to enable drivers to cube out the truck ...

Stay Connected

Sign up to get Overdrive's daily newsletter.

Poll

View Results