K-Line Industries Tire Runout Gauge

Tools | November 10, 2011

The Tire Runout Gauge measures radial and lateral tire runout conditions to help eliminate irregular tire wear and ride vibration to lengthen tire life. The gauge is designed to pinpoint problems related to the tire and rim or other problem areas that may cause runout, to provide an early indication of wheels or tires that need to be reworked or discarded. The device uses a roller wheel placed against the tire tread combined with a gauge bar, individual low- and high-spot sliders and a magnified measurement readout that shows the amount of runout present.

K-Line Industries

www.klineind.com

Visit truckersnews.hotims.com

Snap-on’s roll cart

Snap-on’s KRSC43 Roll Cart has more than 22,000 cubic inches of space for tools. The split-top design slides out from the center to provide access to a 7-inch-deep top compartment to organize large sockets or use as a charging station for power-tool batteries. For more information, ...

Heavy-duty mobile wheel lift

Rotary Lift’s MW-500 Mobile Wheel Lift is designed for removing and positioning any size wheel or tire weighing up to 500 pounds. The MW-500’s arms feature rollers built to allow the wheel to be rotated 360 degrees when aligning it with the hub; the arms ...

Circuit Tester

Snap-on’s Digital Display Circuit Tester (EECT400) is designed to detect voltage, ground and circuit integrity. An LCD display provides the circuit’s voltage value, while a backlit LED indicates red for power or green for ground. A solid copper clip helps provide added electrical signal transfer. Snap-on ...

Torque wrenches

Snap-on TechAngle Torque Wrenches are designed for tightening fasteners to exacting torque and angle standards faster and more accurately than traditional mechanical torque wrenches with angle gauges, even under demanding conditions. Available in three sizes – 1/4-inch drive (ATECH1FR240B), 3/8-inch drive (ATECH2FR100B) and 1/2-inch drive (ATECH3FR250B) ...

Engine pre-heat timer

Webasto Thermo & Comfort North America’s SmarTemp Control fx Timer is designed to work with the company’s engine pre-heaters and to be easy to program for repeated heating duration times, eliminating the need to idle. The high-efficiency heaters help provide fuel savings, reduced engine wear and ...

Stay Connected

Sign up to get Overdrive's daily newsletter.

Poll

View Results