Micro-cordless impact driver

Maintenance & Performance | Tools | November 16, 2012

The Snap-on 1/4-Inch Hex Drive Micro-Cordless Impact Driver with Quick Change Chuck has 50 ft. lbs. of torque output and several other features, including an oversized forward/reverse cushion toggle-style variable-speed trigger that allows for one-hand operation to switch from forward to reverse, twin-beam headlights, a built-in brake, a screened motor and a glass-filled nylon housing.

The Impact Driver’s battery has a built-in gauge to measure its 30-minute charge. The driver also features overcurrent and undervoltage protection and can be used on 12 mm and smaller fasteners, 12 mm oil and transmission pan bolts and water pump pulley bolts.

Snap-on’s roll cart

Snap-on’s KRSC43 Roll Cart has more than 22,000 cubic inches of space for tools. The split-top design slides out from the center to provide access to a 7-inch-deep top compartment to organize large sockets or use as a charging station for power-tool batteries. For more information, ...

Air springs for second-/third-time owners

Veyance Technologies, Inc., manufacturer of Goodyear Engineered Products, announces the launch of its new air spring line, SpringRide, designed for second- and third-time commercial vehicle owners. SpringRide air springs provide an economical alternative to the brand’s premium Super Cushion air springs preferred by first-time owners and original equipment ...

High-efficiency fan, fan drive

Horton’s compact, lightweight Modulator LCV40 Fully Variable Fan Drive and WindMaster Plastic LS11 Fan are designed to deliver improved fuel economy, maximum efficiency and optimized engine cooling in a wide variety of agricultural, construction and transportation equipment. Controlled by the engine’s electronic control unit, the sealed ...

Heavy-duty mobile wheel lift

Rotary Lift’s MW-500 Mobile Wheel Lift is designed for removing and positioning any size wheel or tire weighing up to 500 pounds. The MW-500’s arms feature rollers built to allow the wheel to be rotated 360 degrees when aligning it with the hub; the arms ...

Circuit Tester

Snap-on’s Digital Display Circuit Tester (EECT400) is designed to detect voltage, ground and circuit integrity. An LCD display provides the circuit’s voltage value, while a backlit LED indicates red for power or green for ground. A solid copper clip helps provide added electrical signal transfer. Snap-on ...

Stay Connected

Sign up to get Overdrive's daily newsletter.

Poll

View Results