MOR/ryde Over the Road Power Step

Aero, add-ons, chrome | November 28, 2011

The MOR/ryde Over the Road Power Step was developed to assist the driver into the cab or the trailer. Shoulder, lower back, knee and foot pain will be eliminated, the company says. The step moves up and down like an elevator. By using the Power Step, drivers can increase safety and reduce injury incidence from falling. The new model features a wireless remote control with lights on the front panel. Three standard sizes are available or can be custom-made to fit the trucker’s needs.

MOR/ryde

www.morryde.com

(260) 592-7741

Visit www.truckersnews.hotims.com

Hogebuilt’s fender bracket

Hogebuilt’s FM2012 triangle arm fender bracket is designed to bolt directly to the frame using a single bolt, eliminating the need for a post mount and clamp. The durable, stylish bracket is made of 11-gauge 304 stainless steel and is available in a 27-, 30- ...

Hendrickson’s ProStar bumpers

Hendrickson Bumper and Trim’s durable corrosion-resistant Aero Clad bumpers for the International ProStar in both tilt-mount and fixed-mount configurations are designed to retrofit all model-year trucks. The bumpers are built to offer nearly 4 inches of additional ground clearance and to be lighter than the ...

Fleetline’s refuse fenders

Fleetline’s polyethylene refuse fenders are constructed of high-density polyethylene and are designed to be corrosion- and UV-resistant. The fenders use either a two- or three-piece design to accommodate both tandem and tri-axle applications. Fleetline, www.fleetlineproducts.com

Hogebuilt’s quarter fender

Hogebuilt’s Q134 34-inch premium stainless-steel quarter fender has a mirror finish and is equipped with a heavy-duty 12-gauge universal post-mount triangle arm. The Q134 has a three-inch side flange and is available in 24- to 34-inch sizes. Hogebuilt, www.hogebuilt.com

Aero Clad bumpers

Hendrickson Bumper and Trim’s durable corrosion-resistant Aero Clad bumper for the International ProStar with universal tilt-mount is designed to retrofit all model-year trucks and to convert any fixed-mount bumper into a tilt-mount configuration. The bumper is built to offer nearly 4 inches of additional ground ...

Editor's Picks

Stay Connected

Sign up to get Overdrive's daily newsletter.

Poll

View Results