Truck-Lite Gas Discharge Strobe Lamp

Lights | January 18, 2012

Truck-Lite’s 360 Degree Gas Discharge Strobe Lamp uses a low-cost, cylindrical flash tube. Threaded domes screw on and off for flash tube replacement. Unlike older helical flash tubes, the new cylindrical design concentrates light for the greatest effect. The lamp is designed to operate on 12-volt and 24-volt setups. The light on all models has a 1-year warranty.

Truck-Lite

www.truck-lite.com

(800) 562-5012

Optronics’ anti-theft lighting system

Optronics’ LampLock Anti-Theft Lighting System is integrated into four-inch round stop/tail/turn lamps and three-quarter-inch marker lamps and is designed to make the lamps virtually impossible to steal without destroying them. The system is comprised of a single-diode LED lamp, an integrated anti-theft ring and a ...

Optronics’ LED SuperLamp

Optronics’ four-inch round LED SuperLamp stop/tail/turn lamp is designed to withstand assaults on its internal electrical components, while a specially formulated coating and bonding system helps protect its exterior lens and housing from chemical-related degradation. The lamps are engineered to resist transient voltage, electromagnetic interference ...

Peterson’s LED lights

Peterson’s LumenX LED line now includes 4-inch Round Strobe and 6-inch Oval Strobe lights. Both models offer 12- and 24-volt compatibility and are rated for use as directional flashing warning devices on Class 1 and 2 emergency, maintenance and service vehicles. The lights feature white-diode ...

Truck-Lite’s expanded LED line

Truck-Lite has added 18 Signal-Stat LED products in the form of two additional lines – integral flange and low diode – with offerings in the Marker and Clearance, Stop/Turn/Tail, Front/Park/Turn and Back-Up lighting categories. The integral flange expansion includes 10 part numbers that bring additional ...

Phillips’ marker/clearance LEDs

Phillips’ three-quarter-inch Permalite XT PC2-rated round marker/clearance LED lights are designed for improved light dispersal for vehicles more than 80 inches wide. The lights are manufactured with the company’s Boardfree technology, an in-mold process that uses a single LED sealed in a compact acrylic housing ...

Editor's Picks

Stay Connected

Sign up to get Overdrive's daily newsletter.

Poll

View Results