Slow and Steady

Chris Sheehan can’t imagine doing anything else. The Shelton, Wash.-based owner-operator is a “blade runner” who moves massive windmill blades used to generate electricity. Leased to Integrated Energy Wind Services, he’s hauled blades as long as 153 feet, stretching his overall length to 178 feet. “It’s the most gratifying thing I’ve done as a trucker,” he says.

Sheehan is a member of an unofficial corps of truckers who specialize in handling oversize or overdimensional freight. They transport heavy construction equipment, cranes, transformers, yachts, modular housing and other big bodies. These owner-operators face restrictions that govern where they can operate, when they can haul and how fast they can travel. After obtaining applicable permits, sometimes they have to wait for days until a state trooper is available to accompany their loads. While the process is often frustrating, the compensation is well above average.

Like most trucking segments, however, oversize trucking isn’t what it was before the recession hit. Loads are harder to find, pay is less and many owner-operators have left the field.

For example, Bruce Bryant, an owner-operator leased to Landstar and Overdrive’s 2008 Trucker of the Year, says instead of transporting construction equipment to job sites as in past years, he’s hauled several pieces of repo’d construction gear to auctions this year. Will Duncombe, an owner-operator from Katy, Texas, leased to Anderson Trucking Service, says 60 percent of his trips this year have been transporting general freight, something he falls back on when he can’t find oversize loads. Sheehan says he’s sat idle for days in recent months, and he knows oversize haulers who haven’t worked since October.

But for those who have held on, the rewards usually outweigh the headaches, which start with permits. Every state requires them. The permit specifies the load, its weight, dimensions and when and where it can be transported.

Permit fees, which are paid by the customer, vary widely. The single-use permit to haul wind blades ranges from $10 in some states to more than $500 in others. In these days of budget shortfalls, some states have doubled or tripled their fees.

Partner Insights
Information to advance your business from industry suppliers

A bigger problem, according to Wes Mollno, president of WCS Permits, is the slowdown in state services caused by budgetary problems. “We were informed in July that California’s offices are closed on Fridays,” he says. “Michigan is closing on Fridays as well. When you close offices on a business day, you’re basically telling trucks they can’t move… It forces them to run illegally or sit and park their trucks.”

The job of securing permits varies from load to load and is handled by companies that specialize in permits, the transport company or, in some instances, by the owner-operator. Sheehan orders his own to ensure accuracy and to get his desired route.

Bryant orders permits early “because if you wait until, say, Thursday afternoon, you probably won’t get them until Monday,” he says. Since most states prohibit pulling oversize loads on Sunday, “you could have run Friday and Saturday if you ordered early,” he notes.

He always adds a few inches to the dimensions specified for the load to compensate for inexact measurements. “They tell us to measure before you order your permits,” Bryant says.
In some cases, someone else’s inaccurate measurements can get the hauler in trouble. Once a customer of Bryant’s estimated the weight of an excavator at 70,000 pounds. When Bryant pulled up to a scale and found he was overweight, he had to return the load after a 120-mile roundtrip. “I didn’t get paid a dime,” he recalls.

Some states require escort vehicles in both front and rear; a few specify a steering vehicle in the rear, along with a trailing pilot car; and some don’t require any at all. In Montana, if your total length is 150 feet or more, you must have two pilot vehicles.

Sheehan owns a 2008 Dodge truck as a pilot vehicle and employs a full-time driver who doubles as a team driver when running empty to pick up the next load. He modified his trailer to be able to carry the pickup and save fuel and wear and tear on the vehicle, which already has more than 50,000 miles on it. “I’m able to absorb some of the costs by not having to pay for a pilot car and driver,” he says. “Some companies supply you with a pilot vehicle and driver and you’re stuck with it, even if he crashes.”

If you’re running a load wider, taller, longer or heavier than the basic oversize classification, state police often are required as escorts. In some states the duty is rotated among patrolmen, while in other states the duty is voluntary. Bryant says he had to cool his heels for about eight days over almost two weeks waiting for police escorts while transporting two loads with his father from Arkansas to California. Mollno says, “California can sometimes do overkill, and turnaround times are horrendous.”

Regulations for oversize loads specify how fast you can run, such as 10 mph below the truck speed limit. As much as possible, oversize haulers prefer to travel on interstates, both for speed and the absence of time-consuming tight turns. When you reach a corner or a sharp turn on a two-lane with a long load, you have to stop, unlock the steerable trailer to maneuver the turn and then lock it back.

It’s often difficult to find a parking place for a load that’s 150 feet or longer, says Eric Larsen, an owner-operator who’s been driving for Joule Yacht Transport for almost eight years. The Piqua, Ohio, resident knows the truck stops and rest areas where he’s likely to find parking.

“It’s hard to get into the IdleAire spots,” he says. “Even buying fuel and getting up to some of the pumps is a problem. With low trailers, if there’s even just a little dip in the driveway, you can get stuck real easily.”

For safety reasons, many states ban evening travel. But you can travel at night in Utah. Same goes for Minnesota, but your oversize load signs must be reflective on the tractor and pilot vehicles.

Road conditions can play havoc with oversize loads. If there’s ice or snow on the road, you can’t go. If there’s fog or visibility under a half-mile, you are prohibited from running. Especially troublesome for long loads are crosswinds that can push a trailer from one lane to the next.

“The transportation department will probably shut the road down before we get into winds high enough to bother us,” says owner-operator Duncombe.

Such situations are just one example of where experience is prized for owner-operators looking to do oversize hauling. Gary Ayers, vice president at Arlington Heavy Hauling in Jacksonville, Fla., looks for owner-operators who have at least a year of verifiable experience transporting machinery or heavy equipment.

Ayers also wants drivers who “aren’t too finicky” about what they haul as opposed to those who are attracted to the way a load looks on their truck or where the load is going.
“We like drivers who have a good understanding of their profit margin and their bottom line,” Ayers says. “Those are drivers who understand you might make more profit on a 300-mile move than you make on a 3,000-mile move, even though the longer move pays more money. Those are guys who are pretty golden, because they might work a regional area and do pretty well at it.”

Bryant, for example, says most of his loads are within 1,000 miles of his Alabama home. Ayers says one of his owner-operators lives in South Carolina and commutes to Florida to perform local oversize hauling during the week before returning home for the weekend.
Larsen says that once you make the adjustment to navigating oversize loads, the work isn’t that much different from hauling general freight. “But you need to pay a lot more attention to what you’re doing,” he says.

The Business Manual for Owner-Operators
Overdrive editors and ATBS present the industry’s best manual for prospective and committed owner-operators. You’ll find exceptional depth on many issues in the 2022 edition of Partners in Business.
Download
Partners in Business Issue Cover