Compact platform and step system

Aero, add-ons, chrome | Trailers | May 07, 2013

Bustin-Slide-Go-Space-Saver-PlatformBustin’s Slide & Go Space Saver Platform is a compact platform and step system that can be mounted on existing equipment on most truck bodies, including flatbed trailers, vocational trucks and recreational vehicles. The platform is designed to enable drivers to cube out the truck and then down-stack the product for delivery; it is engineered to operate in tight alleyways or locations with cramped or limited space.

The platform measures 28 inches deep by 36 inches wide and is suited for side-door access and trucks with limited undermount space; height varies from 8 inches for the platform only to 19 inches for the platform with Bustin’s retractable Slide-Away Step installed. The platform is rated with a 600-pound load capacity, and the step is rated for 350 pounds.

The platform features a single-hand latch release and can be opened and locked in place in seconds; an active locking mechanism keeps the platform secure during use. Additional safety features include serrated slip-resistant grating and a handrail option; storage for safety posts and chains also is available.

For more information, visit www.romcorp.com.

Hogebuilt’s fender bracket

Hogebuilt’s FM2012 triangle arm fender bracket is designed to bolt directly to the frame using a single bolt, eliminating the need for a post mount and clamp. The durable, stylish bracket is made of 11-gauge 304 stainless steel and is available in a 27-, 30- ...

Hendrickson’s ProStar bumpers

Hendrickson Bumper and Trim’s durable corrosion-resistant Aero Clad bumpers for the International ProStar in both tilt-mount and fixed-mount configurations are designed to retrofit all model-year trucks. The bumpers are built to offer nearly 4 inches of additional ground clearance and to be lighter than the ...

Fleetline’s refuse fenders

Fleetline’s polyethylene refuse fenders are constructed of high-density polyethylene and are designed to be corrosion- and UV-resistant. The fenders use either a two- or three-piece design to accommodate both tandem and tri-axle applications. Fleetline, www.fleetlineproducts.com

Hogebuilt’s quarter fender

Hogebuilt’s Q134 34-inch premium stainless-steel quarter fender has a mirror finish and is equipped with a heavy-duty 12-gauge universal post-mount triangle arm. The Q134 has a three-inch side flange and is available in 24- to 34-inch sizes. Hogebuilt, www.hogebuilt.com

Aero Clad bumpers

Hendrickson Bumper and Trim’s durable corrosion-resistant Aero Clad bumper for the International ProStar with universal tilt-mount is designed to retrofit all model-year trucks and to convert any fixed-mount bumper into a tilt-mount configuration. The bumper is built to offer nearly 4 inches of additional ground ...

Editor's Picks

Stay Connected

Sign up to get Overdrive's daily newsletter.

Poll

View Results