Gear

Delo Grease ESI

Lubricants/Coolants | January 25, 2012

Chevron Products Co. introduced Delo Grease ESI, an extended service interval grease. The grease is designed as a 30,000-35,000-mile drain interval grease, the company says. In viscosity, it is between NGLI No. 1 and No. 2 greases, designed for general chassis purposes from the fifth wheel to wheel bearings. Chevron recommends following factory drain intervals for engine oil.

Chevron

chevron.com

Royal Purple’s lubricant line

Royal Purple’s Duralec lubricants are developed for the over-the-road trucking, construction, mining, agriculture and heavy-duty fleet markets to optimize equipment performance. The line includes heavy-duty motor oils, transmission fluids, gear oil, multi-purpose grease, coolant additive, tractor fluids, hydraulic fluids and diesel additives, each formulated with ...

Spray-on grease

Amsoil Spray Grease is designed to reduce mess while greasing hard-to-reach spaces such as hinges, latches, overhead door tracks, nuts/bolts and any other pivot point or external moving part. The spray grease is formulated to adhere to metal surfaces. For more information, visit www.amsoil.com.

Natural gas engine oil

Champion Oil’s Low-Ash 15w-40 Synthetic CNG Engine Oil is engineered to provide longevity and durability for compressed natural gas, liquid natural gas and propane engines. The lubricant is formulated for added valve recession protection, low oil consumption, piston deposit control, good TBN retention, added shear stability, ...

Fifth wheel grease

Amsoil’s Synthetic Fifth-Wheel Grease is a heavy-duty lubricant engineered to provide protection and performance against wear and corrosion while withstanding high loads and pressures. The grease, available in a squeeze tube, is formulated to stay in place and resist water washout, providing long service life. For more ...

Engine treatment concentrate

Rislone Engine Treatment Concentrate is a penetrating lubrication oil combined with protective engine additives and cleaning agents designed to penetrate into valve seats, bearing surfaces, piston rings and ring grooves to remove sludge and varnish; these deposits are dissolved gradually and held harmless in suspension ...