1986 Pete 359's bounceback: 'Nothing beats an old truck'

Transcript

Dalton Gebhardt was “doomed from the start” to become a truck driver, coming “from a long family of truck drivers on both sides,” the Illinois-based owner said over the summer at the American Truck Historical Society’s Annual Convention and Truck Show in Springfield, Missouri.

The 30-year-old trucker was on hand showing off the 1986 Peterbilt 359 featured here. He and the truck share a long history: he learned how to drive in it. His father, Chris, bought the 359 in 2014 and worked to fix it up and get it on the road the following year.

Male firefighter named Dalton in gray uniform standing in front of red fire truckDalton Gebhardt“It was two miles from our house, where it sat next to a building for 10 years,” Dalton Gebhardt said. “He spent eight months while he was working full-time for a company as a driver, built this outside on a very tight shoestring budget.”

When Chris Gebhardt bought the unit, it needed work to get it road-worthy. He had to replace the tandem cut-off, as the original “was completely rotted underneath the fifth-wheel slide,” Dalton said.

It also needed a new interior to set out more than a decade ago, which ended up not being an issue because Chris Gebhardt is “an upholstery guy,” owner of Gebhardt Enterprises in Illinois, Dalton added. “It kind of became a business card whenever he first put it together.”

Vintage truck cab interior featuring chrome steering wheel, quilted black door panel, and detailed dashboard controlsThat interior's really looking sharp more than a decade later, with further mods.

Otherwise, upgrades have been mostly minor, he said -- upgraded rubber to 24.5s, adding back the original-style dual square headlights, new rear fenders, deck plate, tanks.

Custom wood-lined truck bed with coiled air hose and automotive equipment installedHe also added a wood floor to really set the interior apart.

On the whole, the Gebhardts “really tried to not make it over-the-top, [or] something that it’s not” in other words, Dalton said. “Just tried to keep it true to the heritage of what the truck was back in the ‘80s and ‘90s.”

[Related: Add your truck to Overdrive's Reader Rigs showcase]

Dalton got his CDL in April 2019 and drove the 359 for his dad under his authority before he bought the rig from him by the end of that year. He started out pulling a frameless dump trailer but quickly moved over to flatbed.

“I was running under dad’s authority, so it was just part of the family business,” Dalton said.

He did that for about five years until around Thanksgiving 2024, when the truck’s engine gave up the ghost. A shop in southern Illinois was contracted to put a new engine in it.

“It was two days away from being done when a snow and ice storm came,” Dalton said. “And then with the weight of everything on the roof of the building” -- the snow and ice build-up -- “it caved in on the truck." 

Adding insult to injury, he added, "with the body damage, it filled a brand-new motor full of water, so I had to have another motor put in it.”

He said “it was just a major process with insurance and all that stuff” trying to get the truck fixed and back in his possession. He went to work for West Memphis, Arkansas-based Blackjack Express as a company driver, moving oversize freight, where he was still hauling at the time of the ATHS show in June.

Red Peterbilt semi-truck with chrome grille displayed at outdoor truck showThe rig was hooked to Chris Gebhardt's 2012 Mac step deck at the show. Dalton himself owns a 48-foot 2006 Benson flatbed he planned to pull with the 359 back in service.

He's had the 359 back at its rightful home since June of 2025, but being busy with work and not home to work on it, finishing touches “got pushed to the back burner, unfortunately.”

After that ordeal, it's now powered by a 400-hp B-model Cat with an 18-speed and 3.70 rears, gearing up to being back in regular service. 

“As much as I appreciate those guys at Blackjack -- they put me in a brand-new truck -- … as much as I really like that new truck, there’s nothing that beats an old truck, especially since it’s my own,” he said.

[Related: Classic 1963 needlenose Kenworth transformed into 45-foot RV]


For custom-equipment features and videos delivered to your email inbox, subscribe to Overdrive's weekly Pride & Polish newsletter via this link and access all videos in the YouTube playlist below.

Transcript

Dalton Gebhardt: I learned to drive in this truck. It was first truck that my dad put together. He spent eight months while he was working full time for a company as a driver. Built this outside on a very tight shoestring budget. And then he ran it for about four and a half years. And that's whenever I bought it. 

Dalton Gebhardt, I'm 30 years old. Based out of Neoga, Illinois. I got my license in April of 2019. I bought this truck in December of 2019. So, I've been driving now for seven years. Right now I do oversize movements for Blackjack Express, they’re based out of West Memphis, Arkansas. Come from a long family of truck drivers on both sides, so I was doomed from the start.

Currently it runs a 400 B model Cat. Got an 18 speed. Running low 24s. First generation low air rear suspension and 3.70 gears.

Overdrive: You know, what kind of custom work have you guys done to it from when your dad built it in ‘14-’15 up through now?

Dalton Gebhardt: Just to get it on the road, it had to have a cut-off put underneath it immediately because it was rotted completely underneath the fifth wheel slide. 

It had to have an interior put it in it right away, which, as luck would have it, dad's an upholstery guy. So it kind of became a business card whenever he first put it together. I mean, ever since then, it's just been, you know, a bunch of minor stuff.

Put the original dual square headlights back on it, got those restored, new set of rear fenders. I repainted the rear frame, did a deck plate, new tanks, got a wood floor in it, but really tried to not make it over the top to basically make it something that it's not. Just tried to keep it true to the heritage of what the truck was back in the ‘80s and early ‘90s.

And I guess I should say, the reason I did get out of this truck, I ran it every day from the time I bought it in December of ‘19 till about Thanksgiving of ’24. The motor went down, it went to a shop in southern Illinois to have a motor put in it. It was two days away from being done when a snow and ice storm came. The weight of the everything on the roof of the building, it caved in on the truck.

To add insult to injury, with the body damage, it filled a brand-new motor full of water, so I had to have another motor put in it. But it's currently in process getting back into regular service, so I'm ready to be back in in my old truck.

As much as I appreciate those guys at Blackjack -- they put me in a brand new truck -- as much as I really liked that new truck, there's nothing that beats an old truck, especially since it's my own. 

Looking for your next job?
Careersingear.com is the go-to platform for the Trucking industry. Don’t just find the job you need; find the job you want with the company that wants you!
Truck History Report
Look up the full history of any truck, including: reported accidents, inspection violations, insurance claim, owner history and more.
Look Up VIN
Attachments Idea Book Cover