Bendix part recall delays new truck shipments

Bendix is working on correcting a potential defect in its ATR-6 valve used in stability control and braking systems after truck operators reported braking problems.

Three manufacturers – Paccar, Navistar and Volvo – have deferred shipments of Class 8 vehicles equipped with the part, which was manufactured between Dec. 2, 2010, and Jan. 18. Bendix estimates up to 60,000 vehicles are affected by the part recall. Daimler Trucks North America doesn’t use the faulty part.

Bendix said a temporary remedy kit is available at the OEM dealers and authorized Bendix aftermarket locations. The company is working on a permanent remedy kit, although no estimate was given of when the permanent fix will be available.

Navistar has stopped production of Class 8 trucks pending a permanent fix. A Volvo spokesman said the company resumed truck production after replacing the ATR-6 with another valve. Paccar hasn’t responded to a media request about its action related to the part recall.

The problem with the Automatic Traction Control Relay Valve can potentially occur only in vehicles operating at or below 0 degrees Fahrenheit, Bendix said in a service bulletin on its website. Intermittent air leakage could result in applying brakes, but is not related to functioning of Bendix stability systems, the company said. Vehicle ABS and service braking will still operate normally on covered vehicles, the company said.

An operator might notice a loss of engine power, according to the posting on the Bendix website. In addition, brake lights may not be illuminated and the brake application pressure gauge won’t show any pressure, the bulletin said.

If a vehicle operator has the temporary remedy kit installed, “the Bendix ESP full stability system and Wingman ACB and Wingman Advanced system will be temporarily [disabled] until the permanent remedy kit is installed,” the company said in a news release.

Bendix reported the part defect to the National Highway Traffic Safety Administration on Jan. 26, after disclosing the problem to the truck makers Jan. 20.

Partner Insights
Information to advance your business from industry suppliers

The company has posted a Q&A about this issue at an ATR Valve Update link at its website at The company also is staffing an ATR-6 phone line to answer technical questions and provide ordering information daily from 7 a.m.-8 p.m. ET. Its toll free number is 1-800-478-1793.

Showcase your workhorse
Add a photo of your rig to our Reader Rigs collection to share it with your peers and the world. Tell us the story behind the truck and your business to help build its story.
Submit Your Rig
Reader Rig Submission