Savannah, Ga.-based owner-operator Bruce Arnold hauls this 1996 Load King three-plus-one RGN with a 2018 Peterbilt 367. In early April, Arnold was under this load, a transformer hauled for a contractor on a power co-op’s Arizona project. It was priced to make it worthwhile even with a deadhead all the way back to the East Coast.
The evolution of heavy and specialized hauling has followed manufacturers “pushing the limits of what can be on the interstates and the highways,” says Erik Thompson, now in sales for Daily Express. Items needing to be moved just “keep getting bigger and bigger and bigger.”
Earning potential for those willing to take on the bigger investment required to move the mega-freight – time, planning, permitting, expensive equipment and so much else – also can be much greater.
Clients of owner-operator financial services provider ATBS who focus on heavy/specialized hauling “make more than the average owner-operator, often into the six figures for net income,” says ATBS President Todd Amen. It’s a complicated niche, but for those “willing to take the risk,” he adds, “the reward is far greater.”
He cites an example of an operator running just 40,000 annual miles, bringing in $500,000 in revenue and taking home well more than $100,000 for himself.
Such earnings have been less certain as the general economy has ground down with the spread of COVID-19. Some trucking segments remained strong during March and less so this month, while flatbed in general has struggled.
By the first weekend of April, heavy-haul owner-operator James Canter of Huntsville, Alabama, found it getting “harder to find shippers and receivers open on both ends of the load.” He’d just dealt with back-to-back cancellations, wasting nearly 1,000 miles just getting to the pickup sites between the two loads. The first canceled after a wind farm at the receiving end shut down for the time being. The second involved a Texas plant shut down after a positive COVID-19 case. Canter decided to wait out that second load, though, and it ultimately delivered.
He and other owner-operators worry for “the day to come when you go to move a piece of construction equipment, and [states suddenly] say that’s not essential,” in the words of heavy/specialized owner-operator Bruce Arnold of Savannah, Georgia. Arnold has been trucking, mostly in the big and tall and heavy niche, since his first load after he leased to Daily Express of Carlisle, Pennsylvania, in the mid-1980s.
Bruce Arnold
He’s now independent with a four-axle 2018 Peterbilt 367 and a 1997 three-axle Load King RGN with a fourth flip-out axle. He believes the current crisis is a “really hard one to call” when it comes to freight availability. “Like I tell everybody, ‘If what you’re doing works for you, keep doing it.’ I’ll keep trucking until somebody stops me.” When his direct customers are slow, he supplements income with local heavy-equipment mechanic work near his home.
Owner-operator Arnold’s 2018 Peterbilt 367
The holy grail of heavy and specialized hauling’s high earnings during normal market times is the province of a rare species of owner-operator, says Thompson.
“There are two kinds of people who go into business for themselves,” he says. Many simply want to work “when they want, if they want.” And that other type? “He’s going to strive to work harder and smarter than the rest. Those types of guys are in limited supply. And it’s those of that skill level who command the best freight with the highest rates.”
Randy Cunha has been one of those. Hailing from Conroe, Texas, the Tonto Express one-truck independent is close to retirement. He says he made his best money in a heavy/specialized career that has spanned decades running equipment between Texas and a pipeline-build operation in the Midwest.
“I made my most money year before last, an easy $10,000 a week or better” in revenue, he says. Cunha “had a few gremlins” when it came to needed repairs that same year, though, “so I did have some downtime that year.”
He runs a four-axle 2001 Peterbilt 379 with 46,000-lb. rears and a 5:38 final gear ratio. That pulls a 2004 Fontaine RGN that’s similar to Arnold’s in configuration. An owner-operator choosing a heavy/specialized trailer is “playing the weight game, getting it just right so you can haul just what you want to typically haul.”
Texas-headquartered owner-operator Randy Cunha’s Pete/Fontaine RGN combo loaded with what was his bread and butter the last few years, heavy equipment., to and from oil/gas pipeline-build operations in the Midwest from Texas.
Cunha and Arnold are what Arnold calls “heavy lightweights.” Their empty weight – about 51K lbs. in Cunha’s case – doesn’t give them a lot to work with if they want to stay under 80K and avoid permits.
For Cunha, a typical load ranges 140K-150K for total weight, with up to 100K maximum payload, particularly in Texas, where rules on axle weights are such that he can swing that. There aren’t many such states — a more typical load is a big excavator weighing around 90K, he says.
Kevin Kocmich, recently named 2019 Owner-Operator of the Year in the program coproduced by the Truckload Carriers Association and Overdrive, takes a bit of a different tack in his leased operation with Diamond Transportation of Racine, Wisconsin.
His 2020 Peterbilt 567 is “spec’d out to do this type of work” with a 565-horsepower Cummins and an 18-speed transmission. Crucially, though, there’s no extra lift axle on the tractor, unlike in Cunha’s and Arnold’s operations, keeping down Kocmich’s empty weight.
Kocmich’s efforts to get as close to his empty-weight sweet spot of about 40K also influenced his choice of a 2008 XL Specialized RGN with just two rear axles. It’s well-configured to haul heavy equipment that’s often dealer-bound and to keep most loads under heights that require permitting or pilot car escorts. Arnold and Cunha try to stay under 150K lbs. and 90 feet to avoid the necessity of pilot cars themselves in most states.
Kocmich’s trailer “has pull-outs for the outriggers” from the main deck “instead of flip-outs,” he says. They can accommodate loads up to 13 feet wide. Their configuration means that a piece of equipment whose wheels rest principally on those slide-outs sits about 4 inches lower than it otherwise would on the main deck.
This piece of equipment sits on the main deck’s slide-outs of Kevin Kocmich’s 2008 XL Specialized trailer, pulled by his 2020 Peterbilt 567. The slide-outs provide a deck expansion alternative to the more common flip-outs. Kocmich grew up on a farm, working with lots of heavy equipment. “I like the challenge of the equipment,” he says. “At a lot of the dealers, we have to load and unload the equipment ourselves — it seems every year they change the layout of the switches.”
Compared to a trailer with more customary flip-outs, the slide-outs make for what Kocmich says is a “spendier” trailer, $65,000 new, he estimates. He lucked into his via a farmer who was selling it with just 100,000 miles on it. Kocmich put on new tires and brakes, ran it for a year, then had it sandblasted, repainted and rewired. “I’m probably $20,000 [for total investment] under what I would have spent on a new one,” he adds.
As with most leased heavy-haul operators, Kocmich is paid a percentage of revenue after permit costs are deducted. Through mid-April, Kocmich says, rates had fallen a bit, but his settlements “haven’t gone down much … even though loads are a bit cheaper than before.” As long as they’re available, he’ll use his knowledge and experience to focus closely on “putting the right loads together” for profitable runs. “That’s the key.”
Arnold feels fortunate to even be able to work and earn at a relatively steady pace. “I get aggravated when people say, ‘Well, I’m not getting laid off,’ ” as a way of making light of another’s situation. “What have you done for somebody who is getting laid off? Those are the folks we need to help.”
For the extra-busy grocery haulers, “Thank God for them and that they’re able to get some extra money in this,” Arnold says. But no one should be quick to raid the chrome shop, he advised. Last year saw too many trucks for the available freight, depressing rates.
So what about that new toilet-paper haul that’s paying $3/mile? In a month or two, like as not “it will pay $1.14,” he says. “Be resourceful with whatever extra you make — maybe we’ll see the light at the end of the tunnel” before the bottom totally drops out.
